Tower Fan
USER INSTRUCTIONS
Plug the power cord into an electrical outlet.
For fan use only, turn the control knob to the left to LO, MED, or HI.
For fan and oscillation mode, turn the control knob to the right LO, MED, or HI.
To turn the fan off, turn the control knob to OFF.
CLEANING AND MAINTENANCE
CAUTION:
Always be sure that the Tower Fan is switched OFF and unplugged before cleaning
or attempting to store the Tower Fan.
1. Before cleaning, turn the Tower Fan off and unplug from electrical outlet.
2. Wipe off excess dust with a lint free cloth.
3. A vacuum cleaner brush attachment can be used to clean the fan guards. This
will help remove lint and dirt from inside the fan. DO NOT ATTEMPT TO TAKE
THE FAN APART.
NOTE: A can of compressed air may also be used to help push any excess dirt
out of the fan and into the vacuum cleaner.
4. Should the fan housing become soiled, it can be cleaned with a damp cloth
using warm (not hot) soapy water and a mild detergent solution. Wipe dry.
5. Do not submerse your fan in water or any other liquids. Do not allow any liquid
to get into the fan or motor
Please Note:
Take care not to stain the plastic parts with oil. Avoid using the fan in places where
oil is liable to spill on fan. Damage or deterioration can be caused by oil on the
housing.
8
help@myproduct.care
User Instructions
AFTER SALES SUPPORT
888-367-7373