Care And Maintenance - Bond YH-LV80C Manual Del Usuario

CARE AND MAINTENANCE

• If necessary, clean the fountain with a soft cloth and change the water frequently. Due to water
evaporation, you may see a buildup of white residue on the fountain surface from mineral content in
the water supply. To prevent such buildup, regularly clean the fountain with soap and water. Do not
use any abrasive, which may damage the applied finish.
• Use of water clarifier or algaecide of any kind will damage the paint on the fountain and will not be
covered under the manufacturer's warranty.
• Check regularly that the water reservoir has sufficient water to cover the pump at all times. It will be
necessary to check more frequently in warm or windy weather.
• Disconnect the power and empty the reservoir if the fountain will not be used for an extended time.
• If installed outdoors and in a freeze-prone area of the country, ensure all water is removed and
the unit is completely dry before temperatures drop too low. This product is NOT to be operated
below 41°F or freeze damage may occur.
• Store your product indoors during the winter months. Avoiding extreme cold temperatures
will prevent from exposure damage.
• Keep this manual for future reference.
Regulator
Model# Description
YH-LV80C
Frequency Flow Height
60 Hz
Water level controller
Rotor
Gland
Filter
Volt. Power
water
120 V
pump
Flow Volume
390L/hour
70cm
Outlet
NOTE: The pump data in this manual is from
lab tests. The actual pump may be different
due to the method of production or technical
6W
improvements. This data can be used as a
reference when purchasing a similar pump.
8
Back cover
Pump housing
Suction cap