Cleaning And Maintenance - Tunstall RTX3371 Instrucciones De Instalación Y Funcionamiento

English
Deutsch
The RTX3371 Telehealth Monitor is used for reception and communication of measurements taken
by on-site external devices such as Blood Pressure Monitors, Personal Weight Scales, Blood Glucose
Français
Meters and other compatible devices: The communication will be performed using:
Español
n Wireless data connection.
n Infrared data connection.
Italiano
n Cable connection.
Dansk
Nederlands
The display on the RTX3371 can be used to show questions that can be answered by pushing the selection
buttons below the display. The current function of the right and left selection buttons will be stated in the
display. If nothing is stated the button is disabled. A speaker is used to support the information shown
in the display verbally. If a menu appears, where different options are listed the up and down buttons to
the right of the display can be used to navigate in the list before selecting the appropriate choice. After
the RTX3371 has received the measured values and answers, it generates a call and conveys the data to
a remote facility via a GSM network. In some cases, the RTX3371 is programmed to deliver data at a
specific time of the day. The delivery of data will automatically be repeated if the attempt to deliver data
fails.

Cleaning and Maintenance

The RTX3371 may be cleaned with a soft, dry cloth or a cloth dampened with tap water and a mild detergent.
A household glass cleaner on a soft, dry cloth may be used to clean off smudges. Never use any solvent,
thinner, lighter fluid, alcohol, wet wipes or similar products on the RTX3371.
Note
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
n Reorient or relocate the receiving antenna of the other equipment.
n Increase the separation between the equipment and receiver.
n Connect the equipment into an outlet on a circuit different from the one used for the receiver.
n Consult the manufacturer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation. Modifications not expressly approved by TunstallHealthcare could void the user's authority
to operate the equipment.
6
RTX3371 User Manual v1.0.indd 6
FUNCTI O NALI TY
25-02-2009 08:11:29