Kodak Easy Share 3 Serie Guia Del Usuario página 7

All manuals and user guides at all-guides.com
Specifications and notes
Specifications:
Communication with
computer/printer:
DC Voltage Input:
AC Voltage:
Notes:
• When the camera is on the dock it is
powered by the dock instead of the camera
batteries.
• Battery check (1 green charging light) may
take up to 10 minutes. See page 3.
• Your AC adapter may have additional plugs.
Use the one appropriate for your locality.
• Dispose of batteries according to local and
national regulations.
?
Troubleshooting
Problem and Cause
Cannot transfer pictures to
the computer
Software is not installed or is
installed incorrectly.
Camera was docked and
transfer button pressed during
software installation. Camera is
listed as an unknown device
(Windows OS-based only).
USB (cable included with
Kodak EasyShare camera
dock, series 3)
5 V DC at 2.0 Amps
110 V to 240 V 50/60 Hz
Solution
(Windows OS-based only)
Disconnect USB cable and
remove camera from dock.
Close all open applications.
Uninstall, then re-install the
software. To uninstall, go to
Start > Settings > Control
Panel > Add/Remove
Programs.
Disconnect USB cable and
remove camera from dock.
Delete camera from Device
Manager: Right-click on My
Computer, go to Properties >
Hardware > Device Manager >
Other Devices.
7
EN