Maintenance Instructions; Storage Instructions; Troubleshooting Guide - EDM Product 07700 Manual Del Usuario

07700
REF.
WHEN TANK IS FULL OF WATER
The dehumidifier will stop working when water tank
is full and the indicator will turn red. To continue using
the unit, remove the water tank, empty it, and replace
the water tank into the unit, as shown in the diagram
below.
Attention: Do not re-use or consume the water collected
in the tank as it may contain germs, bacteria, fungi, and microorganisms.

MAINTENANCE INSTRUCTIONS

Cleaning the unit
Before cleaning the unit, turn the unit off and unplug it from the power socket
to prevent electric shock or accidents.
Wait until the unit has cooled down before unscrewing the screw for cleaning.
Maintaining the exterior of the unit
Use a wet and soft cloth to wipe the outside of the unit.
Clean only the exterior of the unit. Attempting to clean the inside of the unit
may cause electric shock.
Maintaining the water tank
Clean the water tank and water tank cover under running water after emptying
the tank.
Do not re-use or consume the water collected in the tank as it may contain
germs, bacteria, fungi, and microorganisms.
PLEASE NOTE! Do not use solvents, gasoline, xylene or talcum powder to clean
the unit or water tank as this may cause deterioration or corrosion.

STORAGE INSTRUCTIONS

If the unit will not be used for long time:
1. Empty and clean the water tank. Wipe it dry with a clean, dry cloth, and
reinstall it into the unit.
2. Pack the dehumidifier into a box or its original packaging to avoid dust
from collecting on the unit. Store in a cool and dry place.

TROUBLESHOOTING GUIDE

- When troubleshooting your device, please refer to the following ways to
remedy.
- If cannot solve problems in the following ways, contact maintenance center.
INSTRUÇÕES IMPORTANTES DE SEGURANÇA / IMPORTANT SAFETY INSTRUCTIONS
INSTRUCCIONES IMPORTANTES DE SEGURIDAD