Installing Your Fan; Tools Required; Mounting Options - HAMPTON BAY Clarkston El Manual Del Propietario

Installing Your Fan

Tools Required

Phillips screwdriver, straight slot
screwdriver, step ladder and wire cutters.

Mounting Options

If there isn't an existing UL listed mounting
box, then read the following instructions.
Disconnect the power by removing fuses or
turning off circuit breakers.
Secure the outlet box directly to the building
structure. Use appropriate fasteners and
building materials. The outlet box and its
support must be able to fully support the
moving weight of the fan (at least 35 lbs). Do
not use plastic outlet boxes.
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK OR PERSONAL INJURY, MOUNT FAN
ONLY TO AN OULET BOX MARKED ACCEPT-
ABLE FOR FAN SUPPORT AND USE THE
MOUNTING SCREWS PROVIDED WITH THE
OULET BOX. OUTLET BOX COMMONLY
USED FOR THE SUPPORT OF LIGHTING
FIXTURE MAY NOT BE ACCEPTABLE FOR
FA N S U P P O RT A N D M AY N E E D TO B E
R E P L A C E D . C O N S U LT A Q U A L I F I E D
3
Figures 1~3 are examples of different ways to
mount the outlet box.
Outlet Box
To hang your fan where there is an existing
fixture but no ceiling joist, you may need an
installation hanger bar as shown in Figure 3
Outlet Box
(available at any Home Depot store).
Figure 1
Figure 2
Outlet Box
Figure 3