Publicidad
2. Take out the upper freezer drawer
by lifting it up from the rail system,then
push the rail system back.
screws on the inside
Installing the water lines
In order for the ice maker to operate properly,
a water line is required.
You may need to purchase a water purifying
system to do that.
The water connection must be made by a
qualified plumber.
If the refrigerator is installed in an area with low
water pressure (below 30psi/207KPa), you can
install a booster pump to compensate for the
low pressure.
-the maximum inlet water pressure is
101.5psi/700kPa;
-the minimum inlet water pressure is
30psi/207kPa.
Important
:Operation outside the water
pressure range may cause malfunction and
severe,damaging water leaks.
Note
:If the water pressure is less than what is
required, ice cubes could be hollow or
irregularly shaped.
Publicidad
