Descargar Imprimir esta página

Hisense HRB171N6BWE Guía De Uso Y Cuidado página 13

Publicidad

Household Supply
Line
1/4" shutoff valve
with saddle clamp
5. Slip the ferrule(sleeve) and 1/4" compression
nut on the 1/4" water line as shown. Insert the
end of the tubing into the outlet end squarely
as far as it will go. Screw 1/4" compression nut
onto outlet end with adjustable wrench.
Do not overrighten or you may crush the
1/4" water line.
6. Place the free end of the 1/4" water line into
an empty container or sink.
7. Turn on main water supply and open
shutoff valve to flush the 1/4" water line of any
contaminants. Run water until it is clear.
(2)
Connect Water Line to Refrigerator
IMPORTANT: If you turn the refrigerator on before
the water is connected, turn off the ice maker.
1. Unplug refrigerator or disconnect power.
2. Close shutoff valve.
3. Thread a 1/4" compression nut and ferrule
(sleeve) onto the free end of the 1/4" water line.
Ferrule (sleeve)
1/4" compression nut
1/4" water line
Ferrule (sleeve)
1/4" compression nut
1/4" water line
4. Insert the free end of the 1/4" water line into
the brass fitting attached to the water inlet on
the back of the refrigerator.
5. Slide the 1/4" compression nut over the ferrule
(sleeve) and screw the 1/4" compression nut
onto the brass ftting.
6. Confrm 1/4" water line is secure by gently
pulling on it.
7. Turn on water supply and check for leaks.
Correct any leaks.
1/4" compression nut
1/4" water line
Ferrule (sleeve)
G
Brass fitting
H
Water inlet

Publicidad

loading

Este manual también es adecuado para:

Hrb171n6aseHrb171n6bseHrb171n6bbeHrb171n6aweHrb171n6abe