In the example above, cooking time has been programmed first; the ready time was calculated automatically and was edited
by us. It is also possible first to program the ready time, in that case the cooking time will be calculated automatically and
should be edited thereafter.
During the automatic cooking program, the backlight color of the screen will be green before and red during cooking.
Mains power interrupts will switch your oven into OFF mode. In that case the hand icon on the screen will flash and 12:00
will be displayed. Any cooking program will also be cancelled. Press the
again to the
button switch to adjust the clock (See Time of Day Adjustment)
NOTE: If you will not use your oven right now, be sure that it is in OFF position.
FLASHING
ICON INDICATES THAT YOUR OVEN IS INOPERATIVE AND YOU SHOULD PRESS THE
Buzzer Volume Adjustment
1) Long press the
button 2) Using the + or – buttons,
for 5 sec, you will hear the
current tone.
Programmable Options
Buzzer tone adjustment
•
Press the
button for 5 seconds ( till you see 'pr 1' on the screen).
•
Press the
button to decrease buzzer volume
•
Press the
button to increase buzzer volume (default is already high)
•
Press the
button to record the last heard tone.
NOTE: to exit without recording press the
Defaults: Buzzer
: High tone Click tone : On
1.
A safety panel is designed to protect control panel and the buttons when the oven is in Grill mode (Figure 1)
2.
Please use this safety panel in order to avoid the heat to damage control panel and the buttons when the oven is Grill
mode.
3.
Place the safety panel under control panel by opening the oven front cover glass (Figure 2)
4.
And then secure the safety panel in between oven and front cover by gently closing the cover. (Figure 3)
5.
It is important for cooking to keep the cover open in specified distance when cooking in grill mode.
6.
Safety panel will provide an ideal cooking circumstance while protecting control panel and buttons.
Figure 1
you may adjust the volume
(3 steps available).
button.
USING GRILL DEFLECTOR PLATE (optional)
Figure 2
button to get your oven operative, press once
3) Save your selection by
pressing the
button.
7
BUTTON TO RESET
Figure 3