Kohler Sterling 7626 Serie Guia De Instalacion página 13

Install a GFCI-protected 120 V, 15 A grounded outlet.
Bond in accordance
with applicable codes.
8. Install the Electrical Outlet
CAUTION: Risk of personal injury. Do not turn on the power until instructed to do so.
For Installations with Outlets
NOTE: The whirlpool is equipped with a cord and plug. All pump and control wiring has been completed
at the factory.
NOTE: Refer to the label near the pump. This label identifies the electrical rating and model number of the
whirlpool.
Install the GFCI-protected, 120 V, 15 A grounded outlet behind the whirlpool and within 24" (61 cm)
of the pump's future location. No other load should be on this circuit.
If the whirlpool is equipped with a heater (not shown), install a second GFCI-protected, 120 V, 15 A
grounded outlet behind the whirlpool and within 24" (61 cm) of the pump's future location. No
other load should be on this circuit.
Install a bonding (grounding) conductor at the future location of the pump in accordance with any
applicable local codes.
Sterling
Make sure air actuator tubing
is securely attached to the pump.
Bond in accordance with applicable codes.
NOTE:
Pump model illustrated may
differ from your actual product.
13
Pump Electrical Cord
1105582-2-B