Mounting The Wall Bracket - Fuller 55004 Manual De Instrucciones

Charging the battery
• Connect the charger to socket on the back of the appliance
as shown in the illustration�
• Connect the charger delivered with the appliance to a
proper installed wall outlet�
NOTE: During the charging process the control light (3) on the
handle (2) will be illuminated�
• Allow the battery to charge for approx. 8 – 10 hours (first
time: approx� 12 – 15 hours)�
• After charging disconnect the charger from the appliance�
• Recharge the battery after finishing work.
NOTE: It is normal for the appliance housing/battery pack
and charger to become warm (but not hot) during charging
process�
WARNING! To reduce risk of fire, never leave the appliance/battery pack connected with
the charger for more than 24 hours!

Mounting the wall bracket

NOTE: Mount the wall bracket close to a plug wall outlet if possible so it is easier to charge
the battery when the appliance is not in use�
• The hook of the wall bracket must be pointing upwards�
• Mark a hole for drilling� Ensure that there are no cable/pipes in the wall that could be
damaged�
• Drill the hole and insert the dowel supplied�
• Fasten the bracket to the wall with the screw supplied�
• Hook the appliance to the bracket, using the slot on the bottom of the main unit�
Attachment
Window cleaner_56004(P002W)_US+ES_IM_V1_130515.indb 5
OPERATION
Window attachment (8):
For removing water from smooth surfaces such as windows,
tiles or mirrors�
Brush attachment (10):
For removing dust from delicate objects such as picture
frames, lamp shades, keyboards, books etc�
Crevice attachment (11):
For vacuuming in folds, corners, recesses or other places
which are hard to reach�
Attachment for liquids (12):
For vacuum small quantities of liquids�
5
1
Application
2
3
5/15/13 4:19 PM