Starting And Stopping - Husqvarna AUTOMOWER 105 Guía Rápida

Formoreinformationandinstructions,readthecompleteOperator'smanualontheHusqvarnawebsite
(www.husqvarna.com)
1. PL ACEMENT OF AND CONNECTING THE CHARGING STATION
1. Place the charging station at a central position in the working area, with a lot of open space in front of the charging station
andonarelativelyhorizontalsurface.
2. Connectthepowersupply'slowvoltagecabletothechargingstationandthepowersupply.
3. Connectthepowersupplytoa100-240Vwallsocket.
4.  P lacetheroboticlawnmowerinthechargingstationtochargethebatterywhiletheboundarywireislaid.Setthemain
switch to position 1.
2 . PL ACEMENT OF THE BOUNDARY WIRE AND THE GUIDE WIRE
1.  L aytheboundarywiresothatitformsalooparoundtheworkingarea.
2. Makeaneyeletatthepointwheretheguidewirewilllaterbeconnected.
3.  R untheguidewiretothepointontheboundaryloopwheretheconnectionwillbemade.Avoidlayingthewireattight
angles.
3. CONNECTING THE BOUNDARY WIRE AND THE GUIDE WIRE
1.  N arrowpassagesintheyardmakeitdifficultfortheroboticlawnmowertofindthechargingstation.Theroboticlawn
mowercanbeleadtoremoteareasusingtheguidewire.Theguidewirealsohelpstheroboticlawnmowertoquicklyfind
the charging station.
2.  L aytheguidewireunderthechargingstationandatleast2m/7ftstraightoutfromthefrontedgeofthechargingstation.
3. Opentheconnectorsandlaythewireendsintherecessesoneachconnector.
4. Press the connectors together using a pair of pliers.
5. Cutoffanysurplusboundarywire.Cut1-2cm/0.4-0.8"abovetheconnectors.
6.  P resstheconnectorsontothecontactpins,markedAL(left)andAR(right),onthechargingstation.Itisimportantthatthe
right-hand wire is connected to the right-hand contact pin, and the left-hand wire to the left-hand pin.
7. Fasten the connector to the contact pin marked GUIDE on the charging station.
4 . CONNECTING THE GUIDE WIRE TO THE BOUNDARY WIRE
1. Cuttheboundarywirewithawirecuttersatthecentreoftheeyeletthatwasmadeinstep2.2.
2.  C onnecttheguidewiretotheboundarywireusingtheaccompanyingcouplers.Pressthecouplerscompletelytogether
withapolygrip.

STARTING AND STOPPING

STARTING
1. OpenthecoverbypressingtheSTOP button.
2. Set the main switch to position 1.Whenyoudothisforthefirsttime,astartupsequencestartswhereyouselectafour
digit PIN code among other things.
3. Press the START button and close the cover.
STOPPING
Press the STOP button.
ADJUSTING THE ROBOTIC L AWN MOWER TO SUIT THE SIZE OF YOUR
L AWN
Themowingresultsdependonmowingtime.AdjustthemowingtimetosuityouryardusingtheTimer function. You decide
whattimesduringthedaytheroboticlawnmoweristowork.Theroboticlawnmowermowsabout43m²/463ft² per hour and
day.Forexample;ifyouryardconsistsof300m²/3230ft²ofgrass,theroboticlawnmowershouldworkonaverage7hoursper
day.
MAINTENANCE
1. The main switch should be in the 0 position during all work on the robotic lawn mower's chassis, such as cleaning or
replacingtheblades.Replacethebladesregularlyforthebestmowingresult.
2. Never use a high-pressure washer or even running water to clean the robotic lawn mower. Never use solvents for cleaning.
3.  A llconnectionstothechargingstation(powersupply,boundaryandguidewire)mustbedisconnectedifthereisariskofa
thunderstorm.
4. Fullychargethebatteryattheendoftheseasonbeforewinterstorage.
QG_P1_105_1158450_runningchange.indd 6
EN
2019-09-17 15:48:36