Filling The Water Tank - Air innovations CLEAN MIST SMART Manual De Instrucciones E Información Sobre La Garantia

Filling The Water Tank

WARNING: Always unplug the unit before removing the Water Tank.
WARNING: DO NOT touch the water in the Base.
WARNING: NEVER fill the Water Tank from the top of the unit. Follow Water Tank
filling instructions in #3.
1
Remove Rotating Mist Nozzle
prior to filling the Water Tank.
4
Replace the Tank Cap by firmly
turning clockwise until tight.
Turn the Water Tank upright and
check the Tank Cap for leaks.
If any water drips, remove the
Tank Cap and retighten.
WARNING: DO NOT place
Water Tank on the humidifier
Base if the cap is leaking.
4
2
Turn the Water Tank upside
down and remove the Tank Cap
by turning it counter clockwise.
5
Place the humidifier Water Tank
on the Base, make sure to fol-
low the shape of the Water Tank
and the humidifier Base
(as shown above) so that the
tank sits level and flush to the
Base. Ensure the tank is firmly
seated.
3
Filling the Water Tank: Use clean,
WARNING:
cool, tap water.
DO NOT use extremely cold water,
since it may temporarily reduce the
WARNING: NEVER
mist output.
fill with hot/warm water or use
additives as this could damage
the unit and void the warranty
WARNING: If you have hard tap
water STOP using tap water and use
ONLY filtered, distilled, cold boiled or
bottled water.
6
Attach the Rotating Mist Nozzle
to the top of the Water Tank for
desired use as pictured.
.