Operating Instructions - Air innovations CLEAN MIST SMART Manual De Instrucciones E Información Sobre La Garantia

Operating Instructions

WARNING: DO NOT operate the humidifier without water in the tank.
WARNING: NEVER lift the tank off the base while the unit is operating.
1
The Delay Start and Auto-Off buttons allow you to set the humidifier to turn ON and OFF automatically as desired.
2
3
4
5
6
7
ON/OFF –
Plug into a standard (120V AC) electrical outlet. The LED Display will turn
on for 2 seconds then turn OFF. Press the ON/OFF button once and the "Operating"
indicator will turn on. Mist may not appear immediately; allow up to 15 minutes for the
water in the tank to transfer to the Base.
Delay Start – The Delay Start feature allows you to program the unit to turn ON
Automatically. To use, press the "Delay Start" button once; you will see "Delay
Start" 01:00H illuminated on the display. This features works in one hour incre-
ments and is programmable up to 24 hours. Simply keep pressing the Delay Start
button until you get to your desired delay start time, once you have reached the
time the display will flash three times and then will start to countdown until the
unit turns ON.
Auto-Off –
The Auto-Off feature allows you to run the humidifier now and set it
to turn off at a specific time automatically (in 1 hour increments from 1-24 hours).
To use - press the "Auto-Off' button once; you will see "Auto-Off" 01:00H illuminated
on the display. This feature works in one hour increments and is programmable up
to 24 hours. Simply keep pressing the Auto-Off button until you get to your desired
Auto-Off time, once you have reached the time the display will flash three times and
then start to count down until the unit turns OFF. The display will start alternating be-
tween the current ambient humidity and the Auto-off Timer. NOTE: You can use the
Delay Start and Auto-Off functions together on this fully programmable LED Display
to program the humidifier to turn ON and turn OFF at your desired times.
Mist Output –
When you turn the unit ON, it will default to the lowest mist setting. Pressing
the "Mist" button each time will increase the output. Press once for Medium, twice for High, three
times for Supreme. Pressing the Mist button a fourth time will bring the unit back to Low
Humidistat –
By using this feature the humidifier will automatically monitor and con-
trol the humidity level according to your desired setting. Once the desired humidity level
is reached the mist will shut OFF until the humidity drops below the setting and then
the mist will turn back ON automatically to maintain the humidity level desired. To set
this feature press the "Humidistat" button to your desired setting. Settings range from
40%-95% RH (Relative Humidity) in 5% RH increments. A 40%-60% Relative Humidity
is recommended. Once you set your desired humidity, the number will blink 3 times and
then the display will revert back to the relative humidity. To view the set humidity level,
press the Humidistat button once.
LED Dim –
To turn OFF the LED Display, press the "LED DIM" button once. Press
the "LED DIM" , or any other button on the control panel to turn the display back ON.
LOW Water –
When the tank is out of water the "waterless" indicator will appear
in the display, you will hear 3 beeps and the automatic safety shut-off will turn the
Ultrasonic Nebulizer & unit OFF.
.
5