Num'axes EYENIMAL NGDISCRO006 Guia De Inicio Rapido página 7

Thank you for choosing an EYENIMAL product. Please read these instructions carefully before use, and keep this
guide for future reference.
Technical specifications
•
Works only with small dry kibble. Do NOT use canned, wet or moist dog / cat food.
•
Easy and quick programming with the "Eyenimal Smart Feeder" app
•
Up to 12 meals per day
•
10 g to 100 g of dry food per meal (depending on the size and density of the kibble used)
•
Manual feed directly from the app
•
Capacity: 4,5 l/2,5 kg of dry food
•
Warning bip sound
•
Two-way audio system (listen to your pet / talk to your pet)
•
Photo & video recording from the app
•
Empty tank alert
•
Plugs into mains
System requirements
•
iPhone with iOS 9 or later / Android smartphone 6.0 or later
•
2.4 GHz (802.11 b/g/n) wireless router
Feeder setup
1. Plug in the power adapter.
Download the "Eyenimal Smart Feeder" app from your phone's app store. Open the app and follow the
2.
on-screen instructions to connect to your feeder. You will need a valid email address and your home Wi -
Fi password. WARNING: your Wi-Fi password must be 6-16 characters long. Complete all instructions and
app setup before filling the feeder with food.
Your feeder is now ready for use! Use the "Eyenimal Smart Feeder" app to schedule meals and set up notifications.
The user's guide is accessible on our website at https://www.numaxes.com/en/content/9-user-s-guides.
Setup troubleshooting
If you went through the setup process and were unable to get your feeder connected, first try the directions within
the app. If you are still experiencing issues, then try the following:
1. Ensure that your home Wi-Fi is working properly and that your phone is connected to it.
2. Ensure that your Wi-Fi password is correct.
3. Place your feeder near your router during initial setup.
4. Place your smartphone near your feeder during initial setup.
Cleaning & maintenance
The appliance comes apart for easy cleaning. The bowl, tank lid and tank are dishwasher safe. You may also clean
the washable parts by hand using cool or warm soapy water. Rinse and let all parts air dry completely before
reassembling.
CAUTION: Do NOT immerse control panel in water. Base unit should NEVER be submerged in water, as
this may damage electronic components.
EN - Quick Start Guide
7