Installation - Klarstein 10030006 Manual Del Usuario

3
4
7
8
10
11
B
A
Notes
• Remove any packaging before use, but retain the safety instructions and store them with this product.
• DO NOT over tighten bolts; only tighten with moderate pressure to avoid damaging the bolts or compo-
nents of the oven.
Assembly
1. Attach both base brackets (10) to both base section (11) using 4 x bolts (a) and 4 x washers (B) each side –
total 8 x bolts and 8 x washers.
2. Attach base shelf (12) to 2 x base section (11) using 4 x bolts (A) each side - total 8 x bolts.
3. Attach body (2) to 2 x base section (11) using 4 x bolts (a) and 4 x washers (B).
4. Attach lower door with baffle (4) to body (2) using 1 x hinge bar (6). Secure using 2 x split pin (C).
5. Attach upper door (3) to body (2) using 1 x hinge bar (6). Secure using 2 x split pin (C).

Installation

1
A
B
2
5
6
6
2
B
A
11
12
A
12