Setting Up The Aqua-Tr - Chopin Aqua-TR Modo De Empleo

2. Setting up the Aqua-
TR
User's manual 
07/2015
Aqua-TR
2.1 Unpacking
■ The apparatus is delivered in a special packing that we advise
you to keep for future use (transfer from one site to another,
shipment for periodic service).
■ In its original packing, the Aqua-TR is maintained in a box
equipped with two preformed polystyrene elements for preventing
shock damage.
To take out the Aqua-TR from the packing, remove the accessories,
as well as the small polystyrene shims. Lift up the Aqua-TR while
handling the unit itself (and not the polystyrene shells).
Put the assembly on a flat surface and remove the polystyrene
shells.
Always carry the Aqua-TR by holding its bottom.
Before re-packing the Aqua-TR for transport, make sure it is in
standby position (cell lower trap doors opened). In this
configuration, cell is locked and weight sensor is protected.
GB
57