RCBS 87065 Instrucciones Del Producto página 3

Before using the RCBS Vibratory Case Polisher, read these instructions
carefully to fully learn how to safely operate the related equipment.
Failure to properly operate the related equipment can result in severe
personal injury and/or equipment damage.
If you have any questions while assembling or operating this tool,
Monday – Friday 5:00 a.m. – 5:00 p.m. Pacific Time (hours may vary)
This instruction manual contains specific safety and operating information.
It should be considered a permanent part of your equipment and remain with the
equipment at all times for easy reference.
READ ALL INSTRUCTIONS BEFORE USE
RELOADING SAFETY
NOTICE - This manual is not intended to provide comprehensive instructions or safety
information on how to reload, or handle or use reloading components. Always read and
thoroughly understand a reloading manual before attempting to reload ammunition.
Reloading is an enjoyable and rewarding hobby when conducted safely. But, as with many hobbies,
carelessness or negligence can make reloading hazardous. This case polisher will add to the quality of
your reloaded ammunition. It has been designed from the beginning with the user's safety in mind.
As with any mechanical device, some safety rules must be followed. When reloading, always follow these
safety guidelines to minimize the risk of personal injury or death.
• Always wear safety glasses.
• Understand what you are doing and why. Read handbooks and manuals on reloading. Talk to
experienced reloaders. Write or call suppliers of equipment or components if you have questions
or are in doubt.
• Read and understand all warnings and instructions accompanying your equipment and
components. If you do not have written instructions, request a copy from the manufacturer. Keep
instructions for future reference.
• Do not rush or take short cuts. Establish a routine and follow it at a leisurely pace.
• Keep complete records of reloads. Label each box showing the date produced, and the type of
primer, powder and bullet used.
• Do not smoke while reloading, or reload near sources of heat, sparks or flame.
• Observe good housekeeping in the reloading area. Keep tools and components neat, clean and
orderly. Promptly and completely clean up any spills.
• Keep your hands and fingers away from "danger" spots and pinch-points where they might be
injured.
WARNING!
Call us at 1-800-379-1732 (U.S. or Canada)
Or email us at rcbs.tech@vistaoutdoor.com
1