Mesko MS 9610 Manual De Uso página 4

6. Empty the fluff container when it is 3/4 full.
7. Sediment on the inside and outside of the blade guard reduces shaving performance.
Clean the blade guard regularly with a brush. (No brush included)
8. Straighten the fabric surface before using the shaver.
9. Do not dent the shaver into the fabric as this may damage the fabric.
10. Do not use the shaver on clothing that you are wearing, always take it off. It may cause
injury to the body or shaver.
11. Always turn off the shaver before connecting the device to the power supply or inserting
the battery.
12. Be careful not to use the shaver on buttons, zippers, applications, patches, stickers,
labels, abrasions, seams and joining elements.
13. Do not use the shaver for clothes made of silk, wool or linen. This can damage the
fabrics and destroy the shaver blades.
14. Do not use the device near water, e.g. in the shower, in a bathtub
or above the sink with water.
15. When the appliance is used in the bathroom, remove the plug from the socket after use,
as the proximity of water is a hazard even when the appliance is turned off.
16. Do not allow the device or adapter to get wet. Where the device
falls into water, immediately remove the plug or adapter from the wall socket. Do not put
your hands in water when the machine is connected to the network. It must be checked by a
qualified electrician before using it again.
17. Do not hold the device or power supply with wet hands.
18. Turn off the device whenever you put it away.
19. Do not leave the device switched on or the adapter unattended when unattended.
DESCRIPTION OF THE DEVICE
1. Safety cap 2. Blade cover
3. Blade group 4. Rotary shaft
5. Power switch 6. Shaver body
7. Lint and pillings bin 8. Battery compartment
BEFORE FIRST USE
Open the battery compartment (8). Insert 2xAA batteries (battery not included). Close the battery compartment cover.
BATTERY CHANGE
Remove the battery compartment cover (8). Remove old batteries. Insert new 1.5Vx2 AA batteries. Close the battery compartment cover.
USING THE FABRIC SHAVER
1. Turn the shaver on.
2. Place the clothes (fabric) on flat surface, smoothen the creasings and move the shaver forth and back along the fabric.
3. Resisting lint can be removed by moving shaver crosswise and then lengthwise (in cross-pattern) on one, small fragment of clothes.
4. You can remove pillings from thin clothing by folding it in multi layers, and putting it on flat, stiff cardboard.
5. In case of clothing with pattern, move the shaver along the pattern line.
CLEANING THE FABRIC SHAVER
Turn off the shaver. Remove the blade guard (2). Remove the blades (3) (be careful! The blades are very sharp). Brush clean the blade
guard (2), blades (3), rotary shaft (4). Empty the knotting and pilling tank (7).
POLSKI
4