Operation; Supply - Saeco D.A. 7P Uso Y Mantenimiento

English

6 - OPERATION

6.1 Beverage Dispensing
• Select a beverage among those available and check the corresponding amount.
• Insert coins into the slot (17) until the required amount is displayed on the coin display (16). N.B. If you
insert a higher amount, the machine will neither return change nor retain the credit.
• Extract a cup from the holder and place it at the dispensing point (25).
• Press the button corresponding to the desired beverage.
• In the sugar dispenser (23) you will find the sugar packets, while the stirrers are available by pressing
the button (19).
• Remove the cup from the dispensing point. The machine is now ready for another selection

7 - SUPPLY

7.1 Machine supply
• Periodically supply the machine with: soluble products, coffee, water, stirrers and sugar packets,
according to the number of products dispensed by the machine
• Soluble product bins:
• Lift out the bins towards front of unit
• Pour the soluble product without exceeding 2/3 of their max. capacity.
• Close the soluble product dispenser and reinsert the bins paying attention to the given positions (Fig.B).
• Water tank:
• Remove the water tank (2) cover and lift the tank out the unit.
18
• Fill with fresh water, reinsert in the unit with its cover .
• Attention: For machines fitted with floor cabinets with a 20
liter tank, it is obviously not necessary to fill the upper tank.
In this case it would be better to remove it together with the
valve, in order to avoid unuseful operations. For the floor
cabinet installation and connection see par.11 " M.B. 7P
cabinet - Installation and Use"
• Coffee hopper
• Remove the cover (3) and fill the box with coffee beans.
• Stirrer dispenser
Fig. E
• Remove the stirrer magazine cover (22) and the metal
weighting bar.
• Insert the stirrers perfectly aligned, then replace the
weighing bar and the stirrer magazine cover (Fig.E).
• Check if it works properly by extracting one stirrer at least.
• Attention: The stirrer dispenser is preset for working with
stirrers as shown in (Fig.F). The use of slightly different
products could create difficulty.
• Cup dispenser
• Insert cups into the top of the cup dispenser tubes (5)
Fig. F