Proper Use; Technical Data - EINHELL TC-SY 18/60 Li Manual De Instrucciones Original

•
Container
•
Cleaning brush (not shown)
•
Cleaning needle
•
Viscosity cup
•
Cap
•
2.5 mm nozzle, mounted on the pistol
(colour: black)
•
Replacement nozzle, 2 mm (red)
•
Original operating instructions
•
Safety information

3. Proper use

The machine is suitable for spraying solvent-bor-
ne and water-borne paint, varnish, primers, trans-
parent lacquer, vehicle basecoats and clearcoats,
stains and wood preservatives. It must not be
used for alkaline solutions, acidic solutions, par-
ticle-containing spraying substances, latex paints,
and paints containing spray or drip inhibitors.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

Motor power supply ................................ 18 V DC
Max. fl ow rate ...................................... 650 ml/min
Container volume ......................................800 ml
Nozzle Ø ..........................................2.0 / 2.5 mm
Max. viscosity .................................... 60 DIN-sec
Protection class .................................................III
Weight without battery ................. approx. 1.2 kg
Danger!
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745.
L sound pressure level ..................... 67.1 dB(A)
pA
K uncertainty ............................................. 3 dB
pA
L sound power level ....................... 78.1 dB(A)
WA
K uncertainty ............................................. 3 dB
WA
Anl_TC_SY_18_60_Li_SPK13.indb 19 Anl_TC_SY_18_60_Li_SPK13.indb 19
GB
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with EN 50580.
Handle
Vibration emission level a
Uncertainty K = 1.5 m/s
The specifi ed vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equip-
ment is used and may exceed the specifi ed value
in exceptional circumstances.
The specifi ed vibration value can be used to
compare the equipment with other electric power
tools.
The specifi ed vibration value can be used for initi-
al assessment of a harmful eff ect.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
Caution!
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment's construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protec-
tion is used.
3. Health damage caused by hand-arm vib-
rations if the equipment is used over a pro-
longed period or is not properly guided and
maintained.
- 19 -
= 1.92 m/s
2
h
2
14.01.2021 13:35:44 14.01.2021 13:35:44