Buttons Introduction; Charging The Battery - AKASO C200 Manual De Usuario

BUTTONS INTRODUCTION

Upon turning on the camera, press the "OK" button to stop recording.
1. Menu : Enter and exist menu.
• Press the button one time to enter to recording mode settings.
• Press twice times to enter to system settings.
• Press third times to back to the main interface.
2. UP : Choose the option above.
3. Down : Choose the option below.
• Press the button to turn on / off the MIC.
4. OK: Confirm the option
• When in system settings, press it confirm the option.
• When in recording mode, press it to start or stop recording.
5. Mode : Playback
• Press the button one time to enter to playback.
• Press twice times to back to the main interface.
6. Lock : Lock the video manually.
7. Power : Short press it to turn on / off the screen, long press it to turn
on / off the camera.
5

CHARGING THE BATTERY

3
① Insert the USB car charger into your car's cigarette lighter socket.
② Insert the USB end of the USB power cord into the USB car charger.
③ Insert the Micro USB into the dash cam USB port
(Charger Specification: In: DC 12-24V, Out: DC 5V 2A)
Note:
1. The battery takes about two hours to be charged fully.
2. When the battery is charging, the indicator light on the top left of the screen will be
stayed red; When it charged fully, the light goes off.
3. To avoid damage to the device, please do not charge the battery via the USB data
cable with other adapters.
6
2
1