Recording Mode Settings; System Settings - AKASO C200 Manual De Usuario

RECORDING MODE SETTINGS

Press the menu button one time to enter to this mode, and press
the option.
1. Resolution - 1080FHD / 720P / VGA three optional.
• Default setting is 1080FHD.
2. Loop Recording - off / 1 minute / 3 minutes / 5 minutes four optional
• Default setting is 3 minutes.
3. WDR (Wide Dynamic Range)
• Default is on.
• Balance light and darkness in driving to get the best image automatically.
4. Motion Detection
• Default is off.
• The detection range is 5m, any motion will activate the camera to start recording, and
it will stop after 20 seconds if there is no any motion at all.
5. Audio Recording
• Default is on.
• Allows you to enable or disable audio recording with your videos.
6. Date Stamp
• Default is on.
• Stamp the date and time to the videos.
7. G-sensor - off / low / medium / high four optional
• Default is medium.
• Gravity Sensor means any collision will activate the camera to record, and the videos
will be locked which will never be covered by new files.
• The video is stored as a file every three minutes. When driving, if the road is bumpy,
please adjust it to low or turn off it directly to prevent the camera doesn't work
because of the memory card is full. When parking, recommend you to adjust it to
medium.
or to choose
7
8. Parking Monitor (default is off)
• Default is off.
• When there is no power input and the camera has been turned off, the camera will be
turned on automatically and start recording, the video will be saved and the camera
automatic shutdown after 30 seconds.
9. License Plate
• Default is off.
• Press or to enter to your plate number, please note that numbers are behind the
letters.
• Stamp the license plate to the videos, you will see it on computer not on camera.

SYSTEM SETTINGS

1. Screen Timeout - off / 30 seconds / 1 minute / 2 minutes four optional
• Default is off.
• Turn off the screen according to your option automatically.
2. Auto Power off - off / 3 minutes / 5 minutes / 10 minutes four optional
• Default is off.
• Turn off the camera according to your option automatically.
3. Frequency - 50Hz / 60Hz two optional
• Default is 60Hz.
4. Beep Sound
• Turn on or off the button sound.
5. Language
• Choose camera's language.
6. Data / Time Setting
• Press button twice to enter to setting interface, choose Data / time.
• Press and to adjust the data and time, press "OK" to confirm the each
option, press to end the setting.
8