Charging The Timer; How To Install The Timer - JARDIBRIC SUMMER KIT Instrucciones

4
/

cHARGInG tHE tIMER :

Connect the timer with the USB cable (supplied) to the mains using a USB adapter (not supplied).
If the battery indicator LED flashes rapidly (1 time per second), if the valve is closed
and the timer does not work anymore, it means that the battery is low and must be
recharged.
5
/

HOW tO InStALL tHE tIMER :

Designed for indoor and / or outdoor use, it is recommended to place the device above the ground
for an outdoor use. The programmer is designed to adapt to various universal water tanks.
You have the choice between 2 installation options:
Option 1
Place the timer on top of a large bottle (4, 5
or 6 liters...) using the bottle adapter.
Ideal for watering up to
10 plants in pots.
The filter keeps the drippers off the water tank impurities. It must be placed at the
bottom of the bottle or the water tank for a good functioning.
Full Battery = 30h of continuous watering
USB
Option 2
Hang the timer on a wall or hang it on a water tank
using the hanger for water tank.
Ideal for watering up to 10 plants in pots
depending on the size of the tank.
Adaptateur
USB Adaptor
USB
En
13