How To Connect The Different Parts - JARDIBRIC SUMMER KIT Instrucciones

En
InStALL tHE HAnGER FOR WAtER tAnk
1. On the bottle adapter, position the
container hanger as indicated on
the picture :
6
/

HOW tO cOnnEct tHE DIFFEREnt pARtS :

FROM tHE tIMER
1. Cut a piece of pipe (using scissors) of the
desired length.
tO tHE pLAntS
EXAMpLE
14
2. Place the hooked parts in the center of the adaptor,
let the pumping tube at the top of the two hooks :
2. Connect the anti-siphon valve to the program-
mer if necessary (refer to p.17), then the hose
to the valve.
3. Use the tees to create connections to the
drippers.
Use the tube holder stakes to keep the
drippers fixed.
Finish the main pipe with a plug.
!
little tricky
step :
lightly twist the
hanger to place
the two hooks.