Cyrus Q-Power Instrucciones De Uso página 4

Cyrus Q-Power
Welcome to the world of Cyrus!
Congratulations on your choice of Cyrus Hi-fi products. Our state-of-the-art design
technology and outstanding quality of manufacture has won countless awards
around the world. We are confident that you will derive great pleasure from
owning a product from one of the most recognised and respected
manufacturers of hi-fi equipment.
Please read these instructions carefully before commencing installation. They
provide full guidance to help you install your Cyrus Q-Power safely and
correctly.
Preparations for Installation
Before installing the Q-Power check that the following items are included in
the accessory box.
•
Guarantee Card (with instruction manual)
•
Power Cable
•
4 speaker plugs
After removing these items, please retain the packing.
Install the Q-Power in a well ventilated location away from sources of high
temperature, dust or humidity. Never stand the Q-Power under another unit or
on any surface likely to hamper its cooling or ventilation.
INSTALLATION
Key to the rear panel drawing (Fig.1)
1. Right speaker output +
2. Right speaker output -
3. Chain Output
4. Input
5. Left speaker output -
Connecting to the AC Mains Supply
Connect the socket on the AC Power cable to the Power inlet g on the rear panel of
the Q-Power. Now connect the cable to a suitable AC power point.
The mains power switch i on the rear panel of the Q-Power should be left on
for normal operation, except when left unattended for a long period when it
should be switched off or disconnected from the AC supply .
Input Connection
Connect a stereo phono interconnect from the output of the preamplifier to the
Q-Power's left and right inputs d. Be sure to observe colour coding of the
plugs to keep left and right channels correctly ordered.
Loudspeaker Connection
Fitting the speaker plugs
Check for polarity indicators (+ and -) on the loudspeaker cable and fit the
plugs provided. Observe any signal directionality markings indicated on the
cable. If an arrow is printed on the cable it should point toward the
loudspeaker.
If additional or replacement speaker plugs are required for the Q-Power
ensure that the correct 'BFA' type are purchased.
Loudspeaker connection
Connect the left loudspeaker to the rear panel sockets f (red speaker plug)
and e (black speaker plug) of the Q-Power. Connect the right loudspeaker to
the rear panel sockets a (red speaker plug) and b (black speaker plug) of the
Q-Power.
Dual outputs are provided for the convenient connection of bi-wiring speaker
cables. Figure 4 shows a wiring schematic for a bi-wired stereo system.
2
6. Left speaker output +
7. Power inlet
8. Mains fuse
9. Power switch
Bi-amplification
For convenience of connection in applications such as Bi-Amplification the
Chain outputs c allow more than one Q-Power to be connected to a Pre-
Amplifier.
The Chain facility can be used with two or more Q-Powers for Bi/Tri-amping by
connecting the Chain output of the first Q-Power to the inputs of the next Q-
Power. Such a system provides the sonic benefits of totally separate power
amplification for the bass and treble units of the loudspeakers.
When adding additional Q-Powers to a system, connect a quality RCA phono
interconnect from the Chain output RCA jacks c to the inputs d of the new Q-
Power.
When the input connections to the new amplifier are complete, separate
connections may be made to the bass and treble units of the system
speakers. Fig. 3 shows a wiring schematic for a bi-amped system.
User Instructions
GB
GB