Sangean WR-50 Instrucciones De Manejo página 12

Pairing and playing your device via NFC
Your radio is equipped with wireless NFC (Near Field Communication) feature, allowing NFC
-enabled devices to pair and play your music with your WR-50. For non-NFC devices, please
refer to the above sections for standard Bluetooth pairing.
1. Turn on the NFC feature on your device.
2. Touch the NFC area of your playing device directly against the NFC tag marked on the top
of your WR-50. The radio will automatically be switched on and connect your NFC-enabled
device. If you're pairing the radio for the first time, some NFC-enabled device will ask for
permission to link with the radio. Once paired with a device, 'Connecting WR-50...' or a similar
message is shown on your NFC-enabled device. The Bluetooth indicator will light in solid blue.
(Important: Please make sure the screen of your playing device is on and unlocked to allow
NFC to work.)
Note:
1. NFC connectivity performance may vary depending on the connected Bluetooth devices.
Please refer to the Bluetooth capabilities of your device before connecting to your radio. All
features may not be supported on some Bluetooth/NFC enabled devices.
2. The location of the NFC detection area is not the same on all devices. When connecting
with other Bluetooth devices via NFC, refer to the User guide of the other device for more
information.
3. Some metallic cases or covers for mobile phones may reduce the sensitivity of NFC. Make
sure you remove it, before activating the NFC.
Disconnecting your NFC-enabled device
To disconnect your device, simply touch directly against the radio's tag again on the top panel.
The Bluetooth indicator on the front panel flashes blue to show the radio is discoverable mode.
11