Applying Power; Declaration Of Conformity - Mio N269 Guia De Inicio Rapido

Applying power

Connect the USB end of the power cable to the GPS
Car Kit. Connect the other end of the cable to a vehicle
power receptacle.
Reinstall your iPhone into the GPS Car Kit and adjust
for proper viewing.
When making viewing adjustments, always hold the
assembly by the GPS Car Kit and not your iPhone.
Make any final adjustments for proper viewing and
tighten the retaining ring.
Bluetooth
When the GPS Car Kit is first powered on, Bluetooth is
automatically set to discovery mode and ready to pair
with a new device.
1. Connect the GPS Car Kit to power.
2. In the iPhone Settings Menu, turn on BlueTooth.
3. Under Devices, select "Mio GPS Car Kit".
4. When prompted to pair with the GPS Car Kit, press
Yes. If you are prompted for a pass code or device
PIN, enter 1234.
5. GPS Car Kit will connect with your iPhone.
6. Pairing is now complete.
Once paired, the GPS Car Kit will automatically connect
with the iPhone when it is in range.

Declaration of Conformity

Hereby, Mio Technology declares that this N269 is in compliance
with the essential requirements and other relevant provisions of
Directive 1999/5/EC.
Visit Mio website (www.mio.com) for the full text of the
declaration for your device.
All brand and product names are trademarks or registered
trademarks of their respective companies.
6
®
pairing
For regulatory identification purposes, GPS Car
Kit is assigned a model number of N269.
en