Kohler K-2834 Guia De Instalacion página 6

Prepare the Site (cont.)
Remove the cut-out template.
Cut along the inside of the marked pencil line for the lavatory
with a jigsaw.
Slowly drill the four 3/8" (1 cm) diameter mounting holes at the
marked center.
For Installations with a Wall-Mount Faucet
Cut along the "above-counter cut-out" line on the cut-out
template.
Using the centerlines as a guide, squarely position the cut-out
template on the countertop to ensure clearance between the
lavatory and faucet.
Use a pencil to trace around the "above-counter cut-out" line on
the countertop.
NOTE: Ensure the faucet spout will reach a minimum of 4" (10.2
cm) over the rim of the lavatory and the stream of water is directed
toward the center of the lavatory basin.
Recheck the clearance between the lavatory and faucet. Adjust the
traced cut-out line, if necessary.
Use a pencil to mark the exact center of the four mounting hole
locations on the countertop.
Remove the cut-out template.
Cut along the inside of the marked pencil line with a jigsaw.
Drill the four 3/8" (1 cm) diameter mounting holes at the marked
centers.
1061942-2-B 6 Kohler Co.