Kohler K-2834 Guia De Instalacion página 7

Marker 5/16" (8 mm)
Bottom View
of Lavatory
Mounting Stud Holes
2. Install the Lavatory
CAUTION: Risk of personal injury or product damage. Cast
iron lavatories are very heavy. Get help lifting the lavatory
into place.
Mark a spot 5/16" (8 mm) in on each threaded stud, as shown.
Hand-tighten the threaded studs into each of the four drilled
mounting holes to the marked point.
Temporarily position the lavatory in the countertop cutout so the
"Kohler" logo is to the back.
Inspect for proper fit.
Remove the lavatory, then place it upside down on a soft cloth.
If applicable, drill the faucet hole(s) and handle location(s) at this
time.
Install the faucet according to the manufacturer's instructions.
Install the drain to the lavatory according to the drain installation
instructions.
Kohler Co. 7 1061942-2-B