Connecting The Fm And Am Antennas; Connecting Power Cable - Yamaha R-S300 Manual De Instrucciones

CONNECTIONS

Connecting the FM and AM antennas

Indoor antennas for receiving FM and AM broadcasts are included with this unit. In general, these antennas should
provide sufficient signal strength. Connect each antenna correctly to the designated terminals.
Note
If you experience poor reception quality, install an outdoor antenna. Consult the nearest authorized Yamaha dealer or service center
about outdoor antennas.
Outdoor AM antenna
Use 5 to 10 m of vinyl-
covered wire extended
outdoors from a window.
■ Assembling the supplied AM loop
antenna

Connecting power cable

Plug the power cable into the AC wall outlet after all other
connections are complete.
12
En
Indoor FM
antenna
(included)
Ground (GND terminal)
For maximum safety and minimum interference, connect
the antenna GND terminal to a good earth ground. A
good earth ground is a metal stake driven into moist earth.
Outdoor FM antenna
AM loop antenna
• The AM loop antenna
should always be connected,
even if an outdoor AM
antenna is connected to this
unit.
• The AM loop antenna
should be placed away from
this unit.
■ Connecting the wire of the AM loop
antenna
(included)
To the wall
outlet with the
power cable