Replace Batteries - universalblue 12000 BTU Manual De Instrucciones

METHOD OF TRANSMISSION
 Point the remote control towards the air conditioning, and then
press the button on the controller. The instruction signal will
be transmitted to the air conditioner.
 After receiving the signal from the remote control, the air
conditioner
acknowledgement sound.
WHEN USING THE REMOTE CONTROL, PLEASE NOTE
 Do not place the remote control near high temperatures, such
as heaters, radiators or blankets or heating pads.
 Do not place the remote control in direct sunlight or strong
lights.
 Avoid accidentally dropping the remote control as this could
cause damage to it.
 Do not place blocking objects between the air conditioner and
the remote control.
 Do not splash the remote control with water or other liquids.
 Do not place heavy objects on the controller.
 If the remote control does not work, replace the batteries and
try again.

REPLACE BATTERIES

When the signal is transmitted but the air conditioning does not give
a confirmation signal, it means that the batteries have been
exhausted and need to be replaced.
Remove the battery cover and remove the used batteries by
removing the screw with a proper screwdriver and sliding the
cover in the direction of the arrow.
Replace the batteries with new ones paying attention to the "+"
and "-" poles.
Close the rear cover.
will emit a beep sound; this is the
42