universalblue 12000 BTU Manual De Instrucciones página 54

Clean the surface of the unit with a damp cloth, then dry using a
duster or similar.
Switch off the appliance before cleaning.
Make sure there is no power to the unit before beginning to
maintain or repair, prevent accident caused by elec. shock.
CAUTION!
Do not use chemical solvent (like benzene, alcohol glazer) to
clean the surface of the unit. If you do so, the surface will be
scratched, damaged, even the whole casing could become
deformed.
BEFORE TURN ON THE APPLIANCE
Check if the air inlets and outlets of the unit are blocked.
Check if the partition plate stopper and the base stopper are
installed accurately.
Make sure that air filter is properly in placed before operating the
machine. If the machine is operated with air filter removed, dust
and foreign objects will result in faulty performance of the air
conditioner.
AFTER THE OPERATIONAL SEASONS
Turn off the air conditioner, disconnect the power source.
Make proper maintenance to the air filter and other parts.
Open the partition plate stopper and the base stopper to drain
out the lew water of the partition plate and the base, then operate
the unit in fan mode for half an hour to make sure the partition
plate and the base is dry.
Please use a plastic sheet to cover the unit to prevent dust or filth
from entering the unit.
54