Use; Cleaning And Maintenance - Imetec L1601 Instrucciones Para El Uso

EN
CONNECTING AND REMOVING THE TEMPERATURE ADJUSTMENT CONTROL FIG. (B)
ATTENTION!
The electric blanket must only be used with the control unit supplied. The relative model
is specified on the label sewn on the panel.
• Insert the plug (7) in the socket (6) to connect the temperature control unit to the electric blanket.
• The same must be done with the second plug in the double bed model.
• Disconnect the plug (7) from the electric blanket by pressing the pushbuttons at the sides of the plug (6).
SWITCHING THE ELECTRIC BLANKET ON AND SELECTING THE CORRECT TEMPERATURE FIG. (C)
ATTENTION!
DO NOT place the control unit under the pillow or under the sheets when in use.
• Turn the electric blanket on from the rear of the control, placing the switch to ON (I) (13) (Figure [C]).
FAST HEAT
• Press the FAST HEAT button (10) [C] to activate the fast heat function. The number 6 lights up in red on the
temperature display (8) [C]. Do not use FAST HEAT temperature 6 while in bed.
NOTE: when the FAST HEAT button (10) [C] is activated, the temperature setting cannot be changed by pressing
the temperature selector
NIGHT-TIME OR CONTINUOUS USE
• press the FAST HEAT button (10) [C] to deactivate the fast heat function. The control will be reset to the last
temperature setting used before activating the fast heat function or turning the control off.
• Select the desired temperature setting between 1 (minimum) and 5 (maximum) by pressing the temperature
selector (9) [C] until the required temperature lights up in the temperature display (8) [C] in orange.
AUTO SHUT-OFF FUNCTION
• The electric blanket is equipped with an automatic shut-off system after 9 hours. Once the timer stops, the
electric blanket turns off automatically and the number on the temperature display (8) [C] starts blinking.
DISCONNECTION
• Select the shut-off position on the rear of the control
socket.
The electric blanket can be washed. Check the washing symbols on the label of the electric blanket to wash it
correctly.
Wash at 40°C.
Do not bleach
WASHING INSTRUCTIONS
• Disconnect the wire from the temperature control unit before washing as shown in Fig. (B).
• It is important to measure the electric blanket before washing it in order to verify that the dimensions are
approximately the same while drying.
10
(9) [C].

CLEANING AND MAINTENANCE

Tumble dry at a temperature that
is less than 40°C
Do not iron

USE

(13) (Figure [C]) and disconnect the plug from the
Do not dry-clean