Publicidad
Idiomas disponibles
Idiomas disponibles
1. Loosen the Bevel Lock Lever at the rear of the saw. 2. Move the blade assembly to the desired angle.
Read the angle on the Bevel Indicator.
3. Lock the blade assembly into position by rotating the Bevel Lock Lever clockwise. Tighten firmly but do
not over-tighten.
4. Make a sample cut in a piece of scrap to confirm that the bevel angle is correct. If it is not, correct the
angle before cutting.
13
www.ELITETOOLS.co
Keep Working
Publicidad
