Where To Use Your Pump - PYD Electrobombas XKS Serie Manual De Instalación Y Mantenimiento

OPERATING AND MAINTENANCE MANUAL
SERIE XKS

1. WHERE TO USE YOUR PUMP

Correcte use:
The pump is intended for private use around the house and garden. It is primarily intended for
drainage purpose if flooding occurs but also for transferring water to and from tanks and pumping
them out, for drawing water from wells and shafts, for draining boats and yachts and for aerating
and circuating water for limited periods.
Liquid conveyed:
The pump is suitable for conceying:
1) Submersible pump for clean water: clean to slightly dirty water with a max. particle size of 5 mm.
2) Submersible pump for dirty water: dirty water with a max. particle size of 35 mm.
The pump can be fully submerged (waterlight encapsulation) and can be lowered down to depth of
7m into the water.
The pump must not be installed in swimming pool; it must be installed and used in accordance with
National installation rules.
Attention:
The pump is not intended for long term use (e.g. use for continuois circulation) in a pond. The length
of life of the pump will be shortened accordingly if used in this way.
- Corrosive (chemicals, cleaning fluids,etc) flammable or explosive substances (e.g. petrol, paraffin,
cellulose thinners); grease, oil, salt water and sewage must not be conveyed by the pump.
- The PH of water must between 6.5 and 8.5. Pollution of the liquid could occur due to leakage of
lubricants. The temperature of the liquid conveyed may not exceed 35 "C. Pollution of the liquid
conveyed may not exceed 35º C.
- Do not expose the plug to damp. Protect plug and power cable away from heat, oil and sharp
edges.
- Do not expose the pump to frost.
- Do not run the pump without water.
5
www.proindecsa.com / proindecsa@proindecsa.com