Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Connecting to the host computer
To connect the camera to the host computer, we recommend using an Ethernet
cable rated Category 6 or higher..
Launching the applications
Step 1:
Power up the camera and wait until the boot phase is complete (see
above).
Step 2:
Launch the Vimba Viewer application and wait for the camera to
appear in the
depending on the number of cameras connected to the PC.
Step 3:
Select the desired camera from
Step 4:
A new camera window appears, as shown in the screenshot on
page 16.
Grabbing images
18
Detected Cameras
list. This may take a few seconds,
Detected Cameras
list.
Publicidad
Tabla de contenido
