Playing Vinyls Records - auna Belle Epoque 1912 Manual Del Usuario

PLAYING VINYLS RECORDS

The system includes a full-size, 3 speed, belt-drive turntable. You can play
33, 45 and 78rpm records.
1. Press POWER to turn the system on.
2. Press the PHONO button to enter the PHONO mode.
3. Make sure you have removed the stylus cover from the stylus and have
released the tone arm lock that secured the tone arm to the tone arm
rest. 5. Set the turntable speed selector to appropriate speed 33, 45 or
78rpm. If you are playing 45 rpm singles, place the 45rpm adapter on
the centre spindle.
4. Place your record on the the centre spindle.
5. Raise the cue lever to lift the tone arm of its rest. Move the tone arm to
the edge of the record. The turntable starts automatically. Use the cue
lever to gently lower the tone arm onto the record.
6. Adjust the volume control to the desired level.
7. When the tone arm reaches the end of the record it automatically returns
to the tone arm rest and the record player stops.
8. Press POWER again to turn the system off. The POWER indicator goes
OFF.
Note: Do not turn or stop the turntable manually. Moving or jarring the
turntable without securing the tone arm clamp could result in damage to
the tone arm.
EN
31