iSi SodaSiphon Modo De Empleo página 6

Siphon Data.
Max. operating
pressure PS
Min. ope rating
temperature
Max. ope rating
temperature
Max. filling volume
Max. number of
chargers to be used
How to Use
Material List.
Description
Bottle
Head
Riser tube/Gasket
Measuring tube
Measuring tube key
Charger holder
Technical data is subject to change without
prior notice.
16 bar / 232 psi
1 °C / 34 °F
30 °C / 86 °F
~ 1 L / 1 US quart
1 iSi soda charger
For refreshing,
sparkling soda
water.
Not approved for
commercial use.
Material
Stainless steel
polished or
lacquered
PA, nickel­plated
ABS, POM, silicone,
NBR, PU, nickel­
plated brass,
stainless steel
PE, TPE
PP, NBR
ABS
Die­cast zinc –
chrome plated,
silicone
6
Safety Information.
Failure to follow this safety instructions or any
recommendation for use and care constitutes
misuse of iSi products and could result in mal-
function of the system and possible personal
injury and/or property damage.
Do not exceed minimum or maximum
pres sure, minimum or maximum tempera­
ture, maximum filling volume, number of
chargers or usage of the iSi Siphon shown
in the Siphon Data! Do not use for any pur­
poses not indicated in these instructions!
Please read the instructions for use care­
fully to avoid operating errors and keep a
copy on hand!
Do not use force when screwing on or off
the head, using the siphon and during any
operation described in these instructions!
Store the iSi Siphon out of the reach
of children!
Only charge a siphon that is filled!
Never store or use the iSi Siphon outside of
the min. and max. operating temperatures.
Do not store in a freezer!
Only use a head and bottle of the same
siphon type together!
Never combine iSi components with
components from another brand or
manufacturer!
The head and the charger holder should
always be screwed on straight and com­
pletely tight, never crooked or incompletely
tightened!
Only use original iSi soda chargers!
EN
7