Promise Technology VessJBOD 1740 Guia De Inicio Rapido página 15

I/O Module LEDs
When boot-up is finished and the VessJBOD subsystem is functioning normally:
• Fan LEDs display green continuously.
• SAS port LEDs flash green when there is activity.
Figure 12.VessJBOD I/O Module LEDs
Fan 2
Fan 1
Disk Drive LEDs
There are two LEDs on each Drive Carrier. They report the presence of a disk
drive, activity of the drive, and the drive's current condition.
Figure 13.VessJBOD disk drive carrier LEDs
If there is a disk drive in the carrier, the Power/Activity LED displays green. If not,
the Power/Activity LED remains dark. The Power/Activity LED flashes during
drive activity.
The Disk Status LED displays green when a drive is configured.
This completes the power and start-up. Go to "Task 7: Setting Up the CLI
Connection" on page 16.
SAS IN port
Circle icon
Fan 1
15
Task 6: Connecting the Power
SAS OUT port
Diamond icon
Fan 2
Disk Status
Power/Activity