Restarting The Air Conditioner Automatically; Using The Mode Function; Cooling Mode - LG VM122H6 NJM0 Manual Del Propietário

Restarting the Air Conditioner
Automatically
When the air conditioner is turned on again after
a power failure, this function restores the previous
settings.
Disabling Auto Restart
1
Open the front cover (Type1) or horizontal
vane(Type2).
2
Press the ON/OFF button and hold it for 6
seconds, then The unit will beep twice and the
lamp will blink twice 4 times.
• To re-enable the function, press the ON/OFF
button and hold it for 6 seconds. The unit will
beep twice and the lamp will blink 4 times.
Type1
Type2
ON/OFF
NOTE
• The feature may be changed according to the type
of model.
• If you press and hold the ON/OFF button for 3 – 5
seconds, instead of 6 seconds, the unit will switch
to the test operation. In the test operation, the unit
blows out strong cooling air for 18 minutes and
then returns to factory default settings.
12

Using the Mode Function

This function allows you to select the desired
function.
Cooling Only Model
Cooling & Heating Model
ON/OFF

Cooling Mode

1
2
3
Cooling Mode
Auto Operation(AI) Mode
Fan Mode
Cooling Mode
Auto Changeover Mode
Heating Mode
Fan Mode
Turn the appliance on.
Press MODE button repeatedly to select the
Cooling Mode.
• is displayed on the display screen.
Press or button to set the desired
temperature.