Using The Light Off Function(Optional); Using The Comfort Air Function(Optional); Using The Energy Saving Function(Optional); Using The Energy Control Function(Optional) - LG VM122H6 NJM0 Manual Del Propietário

Display the Cumulative Energy
Usage(Optional)
1
Turn the appliance on.
2
Press button and hold it about 3 seconds
kW [3 s]
twice.
• The cumulative power consumption(
displayed for a while on some indoor units.
NOTE
• It is not displayed on the wireless remote control.
• kW refers to instantaneous power consumption.
• kWh refers to cumulative power consumption.
• If it is more than 99 kWh, which is the range of
expression, maintain it as 99 kWh.
• Power off resets its value.
• Display wattage under 10 kW with 0.1 kW(h) unit,
and display one over 10 kW with 1 kW(h) unit.
• The actual power may differ from the power
displayed.
Using the Light Off
Function(Optional)
Display Screen Brightness
You can set the brightness of the indoor unit display
screen.
• Press LIGHT OFF button.
Using the Comfort Air
Function(Optional)
Comfort Vane Operation
This function conveniently sets the vane to a preset
directly onto the occupants in the room.
1
Turn the appliance on.
2
Press COMFORT AIR button repeatedly and
select the desired direction.
• or
NOTE
kW
) is
• or
kWh
• This function is disabled when you press MODE or
JET MODE button.
• This function is disabled and auto swing of vertical
direction is set up when you press
• When this function is off, the horizontal vane
operates automatically depending on the set mode.
Using the Energy Saving
Function(Optional)
This function minimizes power consumption during
Cooling and increases the set temperature to the
optimal level for a more comfortable environment.
The temperature automatically settles at 22 °C,
if room ambient temperature is below 22 °C. The
temperature remains constant if it is above 22 °C.
1
Turn the appliance on.
2
Press MODE button repeatedly to select the
Cooling Mode.
3
Press ENERGY SAVING button.
• is displayed on the display screen.
Using the Energy Control
Function(Optional)
1
Turn the appliance on.
2
Press ENERGY CTRL button.
• Press ENERGY CTRL button repeatedly to
select each step.
is displayed on the display screen.
is displayed on some indoor units.
℃↔℉ [5 s]
button.
SWING
17