Microlife PF100 Manual De Instrucciones página 13

6. Please follow the previous sequence to
set the day, hour and minutes.
7. Once you have set the last minute and
pressed the TIME button, the date and
time are set and the time is displayed.
8. Close the data compartment.
9. If you want to change the date and time,
press the TIME button and repeat steps
3-8.
Please note:
• If you hold down the arrow key for
more than 2 seconds it speeds up.
• Date /time can also be set easily
from computer when you run the
Microlife Analyzer Software.
12