Cleaning The Main Unit - Microlife PF100 Manual De Instrucciones

Monitor electrónico para asma
Ocultar thumbs Ver también para PF100:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

4. Inspect the device after cleaning
for signs of mucus or debris inside
the air tube. Each component
should be free of any film. There
should be no visible debris in or on
the product. The device must be
visibly clean.
5. Never put the measuring tube into
boiling water!
6. Reconnect the mouthpiece to the
measuring tube and reassemble to
the main unit as shown. When the
tube is pushed completely into the
fixed position, it will engage the
tab on the body and click into
place.
Notes:
• If you have "hard water", mineral deposits may be visible
on the mouthpiece or measuring tube. Rinse in distilled
water, shake and place on a paper towel and allow to air
dry before using.
• Please note temperatures lower than 50°F (10°C) and
higher than 104°F (40°C) and humidity greater than 85%RH
can affect the accuracy.

8.2. Cleaning the Main Unit

Clean the main unit once a day with a
clean, damp cloth. Never put the main
unit into water.
26
100 C/212 F

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido