Prerequisite Information; Important Safety Instructions For Installation - SOMFY Glydea Ultra WT Guia

EN
These instructions apply to all Glydea Ultra WT motors, in all torque/speed.

1. Prerequisite information

1.1 Fields of application
1.2 liability
2. Installation
2.1. Installation
2.2. Wiring
2.3. Commissioning
2.4. Tips and recommendations for
installation
1. PREREQUISITE INFORMATION
1.1 FIELDS OF APPLICATION
The Glydea Ultra motor is designed to drive all types of curtain track.
Glydea Ultra is a bi-directional motor. By adding module, it be able to integrated into smart room
system, refer Somfy contact or system integrator for details.
1.2 LIABILITY
MANDATORY SAFETY INSTRUCTIONS
Any use outside the scope of application specified by SOMFY is
non-compliant. SOMFY cannot be held liable for any such use
or failure to observe these instructions, which will also result in
warranty being voided. Should any doubt arise during installation
of the drive or in order to obtain additional information, please
visit the www.Somfy.com website or refer to your SOMFY contact.

IMPORTANT SAFETY INSTRUCTIONS FOR INSTALLATION

WARNING: Important safety instructions. Follow all instructions,
since incorrect installation can lead to severe injury.
Please give these instructions to the user after installation.
The drive must be installed by an installer who is qualified in
driveised systems and domestic automation.
The installer must inform the user of the need to arrange main-
tenance for the driveised unit and its associated accessories. He
must specify items that require maintenance, replacement or
checking.
Ensure that the weight and dimension of the product to be
driveised are compatible with the rated torque and rated operating
time. These information are available from your Somfy contact.
Use only accessories (Curtain track, brackets, etc.) listed by
SOMFY to fit to a unit. Part numbers for accessories are available
from your SOMFY contact.
Please refer to the SOMFY literature to ascertain the control
point(s) compatible with the actuator selected.
Fixed controls shall be clearly visible after installation.
A suitable multi-pole switching device must be incorporated
upstream in the fixed wiring in accordance with the wiring rules.
2
CONTENTS
2 3. Use and maintenance
2 3.1. Open and Close buttons
2 3.2. STOP function
4 3.3. Tips and recommendations for use
4 4. Technical data
4
4
5
Copyright © 2017 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved
5
5
5
5
5
.