PIXO C2 Manual De Instrucciones página 19

Caution! You can not charge NiMH / NiCd batteries and
Li-Ion battery packs at the same time!
In addition to the batteries you can charge one mobile
phone, one PDAs, one mp3 player or one car navigation
system at the same time via the USB power connector,
so long as the output power maximum is not exceeded.
NiMH / NiCd charge process
The batteries are fi xed and contact is made with the
snap-in support. Take care to have the right polarity. The
charge process starts automatically after battery inser-
tation. The green LED indicates the charge process. LED
functions are explained in the list below.
Caution!
Do not charge generic dry batteries! Danger of explosi-
on! Charge only high quality and fast rechargeable batte-
ries. Damages from leaked and low quality batteries are
out of guarantee!
Li-Ion charge process
All Li-Ion battery packs have at least two or more con-
tacts. For the charging process you will need only the
contacts with the positive pole and the negative pole. The
positive and the negative pole are marked on the battery
pack. The other contacts are not needed for the charge
process and should not be used. The charger detects the
polarity and the battery voltage automatically. You do not
have to worry about the right polarisation. You only have
to make sure of full contact. The Pixo C2 has a short cir-
cuit protection for Li-Ion batteries.