auna Wallie US-10033227 Manual Del Usuario página 19

Preset radio stations
1 Press the STANDBY button (2) on main unit or (1) on remote control
to turn on the unit.
2 Tap the FUNCTION button (4) on main unit or the MODE button (7) on
remote control to select FM radio mode.
3 Tune to the desired radio station by using either the "manually" or
"automatically" tuning method.
4 Tap the MEM. button (3) on remote control to turn on the unit. The next
available preset memory number will flash on the LCD DISPLAY (10).
(Note: "P01" will blink on the display if you are programming preset for
the first time.)
5 Tap the buttons PRESET+ (12) or PRESET- (5) on the remote control to
select the preset number you want to assign the station to.
6 Tap the MEM. button (3) on the remote control to confirm the setting.
7 Repeat above steps 3 - 6 to preset up to 30 FM stations.
Recalling preset memory channels
• In radio mode, recall the preset channels by pressing the buttons
PRESET+ (12) or PRESET- (5) on the remote control repeatedly.
EN
19