Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
ALARM OPERATION
Setting the alarm clock
This function allows the system to turn on automatically and wake you
using a beeping alarm, a CD, USB, BUZZER or RADIO.
1
In standby mode, hold the AL SET button (12) on the main unit for three
seconds, then alarm time "00:00" will appear on the display. Hour digits
of the alarm clock will start flashing.
2
Press the
FORWARD or
press the AL SET button again (12) to confirm. Minute digits will be
flashing.
3
Press the
FORWARD or
press the AL SET button again (12) to confirm. Alarm wake up source will
appear on the display.
4
Press the
FORWARD or
Buzzer or radio, and then press the AL SET button again (12) to confirm.
Alarm volume level will be flashing.
Note: Alarm volume level setting is not available in beeping alarm
setting.
5
Press the
FORWARD or
alarm volume level and then press the AL SET button (12) to finish alarm
setup.
Notes on the alarm function:
1
If "Wake to CD,USB" is selected but a CD or USB is not inserted, the
alarm will default to the Beeping Alarm automatically when the alarm
wake time is reached.
2
For "Wake to Radio," the system will default to the last radio station
listened to before switching off.
3
The volume of the alarm will be increased to the setting volume.
Activate/deactivate alarm function
1
To activate ALARM, tap the AL SET button once (12). The alarm icon "
will be shown on LCD DISPLAY.
2
To cancel alarm function, tap the AL SET button again (12) until the
alarm icon "
" goes off.
BACK buttons to set the hour and then
BACK buttons to set the minute and then
BACK buttons to select wake to CD, USB,
BACK buttons to preset the wake up
"
EN
25
Publicidad
Capítulos
Tabla de contenido
