Voxx Accessories Acoustic Research Premier AWSEE2BK Guia De Inicio Rapido página 7

Use the audio cable included with this speaker to connect the
audio output from your device to the Aux In audio input on the
speaker's back panel (you might need to open the rubber flap
protecting the jack). The speaker automatically switches to the
Aux In audio. The left Status light turns white.
To listen to Bluetooth audio again, unplug the cable from the
speaker's Aux In jack.
On/Off button turns the speaker on and
off.
Pair button initiates pairing with a
Bluetooth device.
Volume – and + buttons increase or
decrease the volume of the speaker's
audio.
Status indicators show the connection status of each speaker.
Left solid blue means the speaker is connected via Bluetooth.
Left fast blinking blue means the speaker is ready to pair via Bluetooth.
Left slow blinking blue means the speaker is reconnecting via Bluetooth.
Left solid white when an audio cable is plugged into the Aux In jack.
Right solid white means two Premier Series speakers are linked for stereo
sound.
Right blinking white means the Left-Mono-Right switch is set to Left or
Right and the speaker has not linked with another Premier Series speaker.
DC In jack connects to the AC adapter provided to power the speaker.
Left-Mono-Right switch lets you set up two speakers as a stereo pair (Left and
Right). Otherwise, this switch should be set to Mono.
Aux In jack lets you connect directly to the speaker to listen to an audio source.
Battery compartment (not shown) holds 8 AA batteries (not included) to power
the speaker if desired.
aker back
7