Troubleshooting - Saneo BFK1901R Manual De Utilización

agent or white vinegar, (1/3 vinegar 2/3 water in the tank to
pass water, always rinse thoroughly after descaling.
Problem
Don't operate
Machine vision ring
The pump works but does not fill
Technical Specifications
Power supply : 220-240V~50/60 Hz
Power : 110W
Timer adjustable up to 8 hours
Water tank capacity : 4 litres
Net weight : 5.5 kgs
Dimensions (L x W x H) : 26cm x 22cm x 73.9cm
3 wind speeds : low, medium and fast
3 functions : normal, natural, sleep
The remote control works with a CR2025 battery of 3 V.
ERP INFORMATION
Description
Maximum fan flow rate
Fan power input
Service value
Standby power consumption
Fan sound power level
Maximum air velocity
Seasonal electricity
consumption
Measurement standard for
service value

TROUBLESHOOTING

Possible Reasons
1. The power cord is not
plugged in or has poor
contact
2. The on/off button on the
control panel is not
pressed
1. The air filter screen is
blocked by dust or other
dirt to affect the air
output ;
2. The air inlet is blocked by
a foreign body.
The water level in the water tank
is lower than the lowest water
level
002189
Symbol
F
P
SV
PSB
LWA
C
Q
EN ISO 5801 :2008
Solutions
1. Plug in the power and
make good contact
2. Press the on/off button on
the control panel to switch
on the power
1. Remove and clean the air
filter.
2. Remove the foreign
matter in the air inlet.
Add water to the water tank and
restart it.
Value
7.14
85.5
0.08 (m3/min)/W
0.24
67.72
3.22
27.63
Unit
m3/min
W
W
dB(A)
meters/sec
kWh/a